Wood Senior Graphite

0

Posted by S C Caddy | Posted in Clubs | Posted on

Tags: axle shaft, club shaft, graphite rod, graphite shaft, graphite shafts, outer diameter, shaft bottom, steel models

Account limit of 2000 requests per hour exceeded.

Wood Senior Graphite

Shafts for golf clubs are primarily made of steel or graphite. The steel shafts are made of an alloy of carbon steel and chrome of the protection applied to prevent rust. A graphite shaft can also be called a composite shaft, from multiple layers of carbon fiber and resin epoxy holding layers together. There are even some well made steel and graphite. However, you're probably wondering what is best for you?

Steel rods are used for golf clubs since the early 1920s, although earlier versions of May
back to the early 20th century. Graphite shaft is a relatively new material used in golf, dating from the late 1960s, but not gain widespread acceptance until mid-1980. Both materials are used for some of the following reasons.

Steel rods are less expensive and easily Manufacturers able to reconcile the axle shaft. Steel rods are made of a single material, thus creating a new model is limited changes in geometry in the axis than the outer diameter along its' length, thickness, distance between each step (unless it is an axis of rising) and the use of additional metals (such as chromium, vanadium and nickel) in alloys. Channel steel premium cost roughly the same graphite shaft bottom line.

Graphite shafts were originally designed for an alternative to lighter steel shafts. However, there are graphite shafts that weigh more than some steel models, but it is very rare. Steel rods range from 90g to 130g, while graphite shafts can be a little as 39g. The most popular range of weight of the graphite rod Forest is 60-70 grams of iron and the weight of the tree is closer to 70 to 80 grams. One of the biggest benefits of graphite shafts is its lower weight.

Since the graphite shafts are generally more lighter than steel shafts, there is potential for greater distance, which can be turned a little faster. Most clubs meet graphite shaft longer than standard steel club shaft. Golfers tend to be less consistent can find the steel shafts to give them more control. But for golfers, such as women and seniors who need additional length for best play, graphite shafts are a good alternative.

Another advantage of graphite shafts over steel is a point of view of design. As already mentioned, the graphite shafts are manufactured from multiple layers of carbon fiber. Each layer may be another module (strength) of material and can be applied at different angles to help independently stiffness or torque reduction over the entire length of the shaft. This allows manufacturing graphite shafts almost unlimited possibilities in new designs.

Because different materials can be used in the constructor Tree Golf is a much wider high in price too. A shaft of graphite at low price may cost $ 10.00, while the most expensive shaft can cost up to $ 1000.00! Although most graphite shafts are usually under $ 10 - $ 90 range. Wait a club with a graphite rod to cost more than a steel shaft.

It is One reason why most golfers have steel shafts and graphite clubs in their bag. Over 90% of all drivers have graphite shafts in them. It is because the driver is designed for maximum distance and is much more successful and easier than they were there only a few years. For fairway woods, more than 80% are equipped with graphite shafts as players tend to match the driver with the same type of tree. Golfers tend to hit the ball a long way and / or need more control, you can find steel your taste. There are a number of lightweight steel shafts, available as an alternative to graphite.

Irons and wedges are usually just the opposite in the choice of material axis. About 75% of iron sold today are sold with steel shafts. The main reason for choosing steel may be an economic factor as the iron and the corners are a percentage important clubs in the bag. Another reason for choosing the players in their steel plates and wedges to control the distance rather than increasing, especially among stronger individuals. However, there are a number of trees grade iron graphite coming from different weight and rigidity correspond to almost all golfers.

The choice between steel or graphite shafts depending on whether you are looking at a distance greater or not. Increase the distance have a higher cost not only financially, but for those who hit the ball very straight, hitting the ball more, may even aggravate the problem. Some intelligent decision-making based on their personal goals and current trends.

About the Author:

Jeff Summitt is currently the Technical Director of Hireko Golf. Over the past 18 years Jeff has researched, tested and analyzed thousands of different golf shafts. He is the creator of the Dynamic Shaft Fitting Index, which is featured in the Modern Guide to Shaft Fitting. Additionally he authors the annual Dynamic Shaft Fitting Addendum, which instructs clubfitters in the proper fitting and selection of shafts. For more information visit Hireko Golf at http://www.hirekogolf.com.

Article Source: ArticlesBase.com - Which is Better for My Golf Game? Graphite Golf Shafts or Steel Golf Shafts?